Here is the second and final part of my Tateya musubi tutorial. Let´s continue:

take the other Koshihimo and then through the back side

bind the strings together

the same on the right side

tighten the Koshihimo strings

put the loose strings like shown in the picture

Of course you also have to tie the Obimakura on the front side:

after the tying, put the ribbon behind the Obi layers

the Obiage can stay like this for a while. We will tie it correctly later.

now all is tighten =D

take the small folded part from above over the middle part,
then take your Obijime ...

now make a fold like shown in the picture,
then the Obijime through the folded part

the Obijime strings around to the front part ...

let´s tie the Objime: make a loop on the right side,
then the left string through the loop

then under ... and the string through the left small loop

and after that you have this knot =D

one string under, one up ... done!

Let´s go on with the Obiage tying: fold 1/3 on both sides

then fold it in half, the same on the other side ...

just make a knot, take the red marked part ...

make a loop with the red part, two fingers inside the loop

the blue marked part through the red marked loop

then tighten ... the small ends behind the obi layers ...

... now all is done! =D

Sorry again for my bad English description, but I hope the pictures will help you.

0 Kommentare :

Kommentar veröffentlichen